The usual effect of signaling an error is to terminate the command
that is running and return immediately to the Emacs editor command loop.
You can arrange to trap errors occurring in a part of your program by
establishing an error handler, with the special form
condition-case. A simple example looks like this:
(condition-case nil (delete-file filename) (error nil))
This deletes the file named filename, catching any error and
nil if an error occurs. (You can use the macro
ignore-errors for a simple case like this; see below.)
condition-case construct is often used to trap errors that
are predictable, such as failure to open a file in a call to
insert-file-contents. It is also used to trap errors that are
totally unpredictable, such as when the program evaluates an expression
read from the user.
The second argument of
condition-case is called the
protected form. (In the example above, the protected form is a
delete-file.) The error handlers go into effect when
this form begins execution and are deactivated when this form returns.
They remain in effect for all the intervening time. In particular, they
are in effect during the execution of functions called by this form, in
their subroutines, and so on. This is a good thing, since, strictly
speaking, errors can be signaled only by Lisp primitives (including
error) called by the protected form, not by the
protected form itself.
The arguments after the protected form are handlers. Each handler
lists one or more condition names (which are symbols) to specify
which errors it will handle. The error symbol specified when an error
is signaled also defines a list of condition names. A handler applies
to an error if they have any condition names in common. In the example
above, there is one handler, and it specifies one condition name,
error, which covers all errors.
The search for an applicable handler checks all the established handlers
starting with the most recently established one. Thus, if two nested
condition-case forms offer to handle the same error, the inner of
the two gets to handle it.
If an error is handled by some
condition-case form, this
ordinarily prevents the debugger from being run, even if
debug-on-error says this error should invoke the debugger.
If you want to be able to debug errors that are caught by a
condition-case, set the variable
debug-on-signal to a
nil value. You can also specify that a particular handler
should let the debugger run first, by writing
debug among the
conditions, like this:
(condition-case nil (delete-file filename) ((debug error) nil))
The effect of
debug here is only to prevent
condition-case from suppressing the call to the debugger. Any
given error will invoke the debugger only if
the other usual filtering mechanisms say it should. See Entering the Debugger on an Error.
condition-case-unless-debug provides another way to
handle debugging of such forms. It behaves exactly like
condition-case, unless the variable
nil, in which case it does not handle any errors at all.
Once Emacs decides that a certain handler handles the error, it
returns control to that handler. To do so, Emacs unbinds all variable
bindings made by binding constructs that are being exited, and
executes the cleanups of all
unwind-protect forms that are
being exited. Once control arrives at the handler, the body of the
handler executes normally.
After execution of the handler body, execution returns from the
condition-case form. Because the protected form is exited
completely before execution of the handler, the handler cannot resume
execution at the point of the error, nor can it examine variable
bindings that were made within the protected form. All it can do is
clean up and proceed.
Error signaling and handling have some resemblance to
catch (see Explicit Nonlocal Exits:
throw), but they are entirely separate
facilities. An error cannot be caught by a
catch, and a
throw cannot be handled by an error handler (though using
throw when there is no suitable
catch signals an error
that can be handled).
This special form establishes the error handlers handlers around
the execution of protected-form. If protected-form executes
without error, the value it returns becomes the value of the
condition-case form (in the absence of a success handler; see below).
In this case, the
no effect. The
condition-case form makes a difference when an
error occurs during protected-form.
Each of the handlers is a list of the form
body…). Here conditions is an error condition name
to be handled, or a list of condition names (which can include
to allow the debugger to run before the handler). A condition name of
t matches any condition. body is one or more Lisp
expressions to be executed when this handler handles an error. Here
are examples of handlers:
(error nil) (arith-error (message "Division by zero")) ((arith-error file-error) (message "Either division by zero or failure to open a file"))
Each error that occurs has an error symbol that describes what
kind of error it is, and which describes also a list of condition names
(see Error Symbols and Condition Names). Emacs
searches all the active
condition-case forms for a handler that
specifies one or more of these condition names; the innermost matching
condition-case handles the error. Within this
condition-case, the first applicable handler handles the error.
After executing the body of the handler, the
returns normally, using the value of the last form in the handler body
as the overall value.
The argument var is a variable.
condition-case does not
bind this variable when executing the protected-form, only when it
handles an error. At that time, it binds var locally to an
error description, which is a list giving the particulars of the
error. The error description has the form
. data). The handler can refer to this list to decide what to
do. For example, if the error is for failure opening a file, the file
name is the second element of data—the third element of the
If var is
nil, that means no variable is bound. Then the
error symbol and associated data are not available to the handler.
As a special case, one of the handlers can be a list of the
(:success body…), where body is executed
with var (if non-
nil) bound to the return value of
protected-form when that expression terminates without error.
Sometimes it is necessary to re-throw a signal caught by
condition-case, for some outer-level handler to catch. Here’s
how to do that:
(signal (car err) (cdr err))
err is the error description variable, the first argument
condition-case whose error condition you want to re-throw.
See Definition of signal.
This function returns the error message string for a given error descriptor. It is useful if you want to handle an error by printing the usual error message for that error. See Definition of signal.
Here is an example of using
condition-case to handle the error
that results from dividing by zero. The handler displays the error
message (but without a beep), then returns a very large number.
(defun safe-divide (dividend divisor) (condition-case err ;; Protected form. (/ dividend divisor)
;; The handler. (arith-error ; Condition. ;; Display the usual message for this error. (message "%s" (error-message-string err)) 1000000))) ⇒ safe-divide
(safe-divide 5 0) -| Arithmetic error: (arith-error) ⇒ 1000000
The handler specifies condition name
arith-error so that it
will handle only division-by-zero errors. Other kinds of errors will
not be handled (by this
(safe-divide nil 3) error→ Wrong type argument: number-or-marker-p, nil
Here is a
condition-case that catches all kinds of errors,
including those from
(setq baz 34) ⇒ 34
(condition-case err (if (eq baz 35) t ;; This is a call to the function
error. (error "Rats! The variable %s was %s, not 35" 'baz baz)) ;; This is the handler; it is not a form. (error (princ (format "The error was: %s" err)) 2)) -| The error was: (error "Rats! The variable baz was 34, not 35") ⇒ 2
This construct executes body, ignoring any errors that occur
during its execution. If the execution is without error,
ignore-errors returns the value of the last form in body;
otherwise, it returns
Here’s the example at the beginning of this subsection rewritten using
(ignore-errors (delete-file filename))
This macro is like
ignore-errors, but will only ignore the
specific error condition specified.
(ignore-error end-of-file (read ""))
condition can also be a list of error conditions.
This macro is like a milder version of
than suppressing errors altogether, it converts them into messages.
It uses the string format to format the message.
format should contain a single ‘%’-sequence; e.g.,
"Error: %S". Use
with-demoted-errors around code
that is not expected to signal errors, but
should be robust if one does occur. Note that this macro uses
condition-case-unless-debug rather than